800-847-5290

ShrinkCover Standard Modular Cover — Fits 10 ft × 26 ft × 6 ft

$798.49
Availability: In stock
SKU
MSW-SC-MOD-1026-60

Fits a load 24 ft 1 in – 26 ft 0 in long, 9 ft 3 in – 10 ft 0 in wide, 5 ft 7 in – 6 ft 0 in tall. Low-profile ShrinkShield cover for skids, racks and packaged equipment — cut to spec, sewn, heat-shrunk tight on site. Comes complete with a base drawstring around the perimeter of the opening. Made to order, 3–5 weeks. Add to Quote.

This is the middle of the range and the size that moves most. A 10 ft × 26 ft × 6 ft ShrinkCover does one job: protect a finished unit in transit from the factory. At these dimensions that normally means MEP racks, cooling modules, busway and cable-tray runs, and skid trains that leave the shop as one assembly.

What this size fits

  • Length: 24 ft 1 in – 26 ft 0 in
  • Width: 9 ft 3 in – 10 ft 0 in
  • Height: 5 ft 7 in – 6 ft 0 in

Those bands describe the object being covered, not the cut size of the cover. Measure the unit at its widest, longest and tallest point, including anything that projects, and pick the band that contains it. This cover finishes at roughly 734 sq ft of ShrinkShield.

On the road at 10 ft wide

At 10 ft wide the load is already oversize: permit, route survey, daylight running and in most cases an escort. More hours on the road per trip means more exposure per trip, which is where a sewn cover pays back fastest. This is ordinary 48 ft and 53 ft deck territory — one unit, one trailer, and the cover is the only thing between a finished surface and six hundred miles of weather.

How it is built

Each cover is cut 3% larger than the measured load, sewn to spec as a box with an open bottom, then heat-shrunk onto the unit on site. The fabric is ShrinkShield — 7 mil, white, triple-layer. It will take up to 12% shrink and 10% is the design target, and that is the step that pulls the panel down tight to the frame instead of leaving it loose on the load. The 6 ft height class uses about 24% less fabric than the 9 ft class over the same footprint. That is the largest single cost lever available on a low load, so size the height class to the equipment rather than to the trailer. Each standard cover comes complete with a base drawstring around the perimeter of the opening.

The result is the wedge: cut to spec, sewn, and heat-shrunk tight to the load. It does not flap in transit, and it does not have to be re-tensioned at every fuel stop.

Accessories worth specifying

A skid or equipment module that gets opened at the receiving yard should have a zipper access door (MSW-800CONFIG) taped in before it ships — a receiver can then check or energise the unit without slitting the panel and giving up the seal for the rest of the journey. Corner guards (MSW-802) go on the hard points where the shrink pulls tightest: skid frame corners, lifting lugs, anything square enough to work a hole through from the inside. Where the carrier runs chain or strap across the load, a poly-woven strap protector (MSW-801) takes the abrasion instead of the fabric. Cross-woven strapping cord (MSW-500) is what the install crew bands the panel down with before heat goes on.

Lead time and ordering

Made to order, 3–5 weeks. Send dimensions and quantity through Add to Quote and the quote desk will come back with the figure and a build slot. If your unit falls outside these bands, the custom program covers it — ask on the same request.

More Information
SKUMSW-SC-MOD-1026-60
Weight36.000000
BrandShrinkCover
Cover Width10 ft
Cover Length26 ft
Cover Height6 ft
Fits Width9 ft 3 in – 10 ft 0 in
Fits Length24 ft 1 in – 26 ft 0 in
Fits Height5 ft 7 in – 6 ft 0 in
Cover Area (sq ft)734
ConstructionSewn to spec, heat-shrunk
Item ReturnsThis item can be returned

Need Assistance? Get a Custom Quote!

We’re here to help! If you have any questions about this product or need a custom quote, feel free to:

  • 📞 Call us at 800-847-5290
  • 💬 Use our live chat (bottom right corner)
  • 📝 Select your desired quantity and click "Add to Quote" to submit your request

📍 Looking for a custom solution? Many of our products can be customized with larger quantity orders. Visit our Custom Products page to explore customization options.

📩 Need more details? Visit our Contact Us page for our address, phone number, and a contact form to reach our team.

Our team is happy to discuss your needs and provide the best pricing and recommendations for your project!

Customer Questions
No Questions
Please, mind that only logged in users can submit questions
More from ShrinkCover

Customer Also Bought