800-847-5290

ShrinkCover 20 ft Modular Covers

As low as $572.49
Availability: In stock
Only %1 left
SKU
MSW-SC-MOD-20

Six 20 ft sizes — 8, 9 or 10 ft wide, in a 6 ft or 9 ft height class. Fits loads 18 ft 6 in – 20 ft 0 in long. Sewn to spec, heat-shrunk tight to the unit on site. Comes complete with a base drawstring around the perimeter of the opening. Made to order, 3–5 weeks. Add to Quote.

A 20 ft ShrinkCover is the short end of the standard modular range, and it is the length that most often ships in quantity. At this size you are generally loading two or more units to a deck — skids, pods, compact modules, switchgear line-ups — which means the cover goes on at the shop before the load is built up, and then has to survive being handled alongside neighbouring freight all the way to site. That is a different problem from a single full-deck unit, and it is the reason these are sewn rather than draped: protect a finished unit in transit from the factory, including while it is being moved past other units on the same trailer.

A repeating 20 ft unit is also the easiest place to standardise. One size, one cover, ordered against a build schedule rather than one shipment at a time.

The six sizes at this length

Every one of them fits a load 18 ft 6 in – 20 ft 0 in long. Choose on width and height class:

  • 8 ft wide — fits 7 ft 5 in – 8 ft 0 in. Inside normal deck width; an ordinary shipment to a carrier.
  • 9 ft wide — fits 8 ft 4 in – 9 ft 0 in. Covers 8 ft 6 in, the road-legal transport width: the widest a flatbed moves without an oversize permit.
  • 10 ft wide — fits 9 ft 3 in – 10 ft 0 in. Already oversize; permit and escort territory.
  • 6 ft height class — fits 5 ft 7 in – 6 ft 0 in. Skids, racks, switchgear, packaged equipment. About 24% less fabric than the 9 ft class on the same footprint.
  • 9 ft height class — fits 8 ft 4 in – 9 ft 0 in. Building sections, permanent-modular units, data centre modules, tall enclosures.

Those bands are the dimensions of the object, not the cut size of the cover.

How they are built

Each cover is cut 3% larger than the measured load, sewn to spec as a box with an open bottom, then heat-shrunk onto the unit on site. The fabric is ShrinkShield — 7 mil, white, triple-layer. It will take up to 12% shrink and 10% is the design target, and that is the step that pulls the panel down tight to the frame instead of leaving it loose on the load. That is the whole wedge: cut to spec, sewn, heat-shrunk tight to the load. It does not flap in transit.

Accessories

Add a zipper access door (MSW-800CONFIG) wherever the unit will be opened before it is set — it tapes on, so nobody has to slit the panel and surrender the seal. Corner guards (MSW-802) go on frame corners, lifting lugs and projecting steel, where the shrink pulls hardest. Poly-woven strap protectors (MSW-801) sleeve the tie-downs so chain and ratchet hardware wear the sleeve, not the cover. Cross-woven strapping cord (MSW-500) bands the panel to the frame before heat goes on.

Lead time and ordering

Made to order, 3–5 weeks. Pick the width and height class, send quantity through Add to Quote, and the quote desk will come back with the figure and a build slot.

More Information
SKUMSW-SC-MOD-20
Weight0.000000
BrandShrinkCover
Item ReturnsThis item can be returned

Need Assistance? Get a Custom Quote!

We’re here to help! If you have any questions about this product or need a custom quote, feel free to:

  • 📞 Call us at 800-847-5290
  • 💬 Use our live chat (bottom right corner)
  • 📝 Select your desired quantity and click "Add to Quote" to submit your request

📍 Looking for a custom solution? Many of our products can be customized with larger quantity orders. Visit our Custom Products page to explore customization options.

📩 Need more details? Visit our Contact Us page for our address, phone number, and a contact form to reach our team.

Our team is happy to discuss your needs and provide the best pricing and recommendations for your project!

Customer Questions
No Questions
Please, mind that only logged in users can submit questions
More from ShrinkCover

Customer Also Bought