As low as $572.49
Availability: In stock
Only %1 left
SKU
MSW-SC-MOD
66 sizes — 8, 9 and 10 ft wide, 20 to 40 ft long in 2 ft steps, in a 6 ft or 9 ft height class. Sewn-to-spec ShrinkShield covers that protect a finished unit in transit from the factory. Comes complete with a base drawstring around the perimeter of the opening. Made to order, 3–5 weeks. Add to Quote.
The standard ShrinkCover modular range exists to do one thing: protect a finished unit in transit from the factory. Sixty-six sizes, each one cut to spec, sewn as a box with an open bottom, and heat-shrunk tight onto the unit on site — so it does not flap between the loading dock and the set.
The range
- Widths: 8 ft, 9 ft, 10 ft
- Lengths: 20 to 40 ft in 2 ft steps
- Height classes: 6 ft and 9 ft
Two height classes, two different shipments
The 6 ft class is for low freight: power and cooling skids, MEP racks, switchgear line-ups, packaged equipment, busway and cable tray, long low steel. It uses about 24% less fabric than the 9 ft class over the same footprint, so putting a tall cover on a low skid is money left on the deck.
The 9 ft class is for units that ship upright and full height: prefabricated building sections, permanent-modular units, data centre modules, tall enclosures. More sail area, which is precisely the case the sewn-and-shrunk build is for.
Three width classes, three different road problems
8 ft sits inside normal deck width — an ordinary shipment, and the cover is handling weather and road grit. 9 ft covers 8 ft 6 in, the road-legal transport width and the widest a flatbed moves without an oversize permit; it is the width most OEMs build to. 10 ft is already oversize — permit, route survey, escort, daylight running — which means more hours on the road and the fastest payback on a cover that stays put.
How to pick a size
Measure the unit at its widest, longest and tallest point, including anything that projects — lifting lugs, roof curbs, conduit, pallet feet — and choose the band that contains that measurement. The published bands describe the object, not the cut size of the cover. A unit that falls outside them is a custom cover, which is the same fabric and the same build on a quoted size.
How every size is built
Each cover is cut 3% larger than the measured load, sewn to spec as a box with an open bottom, then heat-shrunk onto the unit on site. The fabric is ShrinkShield — 7 mil, white, triple-layer. It will take up to 12% shrink and 10% is the design target, and that is the step that pulls the panel down tight to the frame instead of leaving it loose on the load.
Accessories
Specify a zipper access door (MSW-800CONFIG) on anything that will be opened before it is set — it tapes on, so a receiver or a trade can get in without slitting the panel and losing the seal. Corner guards (MSW-802) go where the shrink pulls hardest: frame corners, lifting lugs, projecting steel. Poly-woven strap protectors (MSW-801) sleeve the tie-downs so chain and ratchet hardware abrade the sleeve instead of the fabric. Cross-woven strapping cord (MSW-500) is the banding used to pull the panel down to the frame before heat goes on.
Lead time and ordering
Every size is made to order on a 3–5 week lead time. Send dimensions and quantity through Add to Quote and the quote desk will come back with the figure and a build slot.
| SKU | MSW-SC-MOD |
|---|---|
| Weight | 0.000000 |
| Brand | ShrinkCover |
| Item Returns | This item can be returned |
Need Assistance? Get a Custom Quote!
We’re here to help! If you have any questions about this product or need a custom quote, feel free to:
- 📞 Call us at 800-847-5290
- 💬 Use our live chat (bottom right corner)
- 📝 Select your desired quantity and click "Add to Quote" to submit your request
📍 Looking for a custom solution? Many of our products can be customized with larger quantity orders. Visit our Custom Products page to explore customization options.
📩 Need more details? Visit our Contact Us page for our address, phone number, and a contact form to reach our team.
Our team is happy to discuss your needs and provide the best pricing and recommendations for your project!
Customer Questions
More from ShrinkCover
PWC Boat Covers by ShrinkCoverOut of stock










