800-847-5290

ShrinkCover Limited Warranty

Version 2.0 · Effective NOVEMBER 17, 2026 · Standard Products and Custom Products · Business and consumer purchases · All channels · Supersedes Version 1.8

This Limited Warranty is given by Harbor Bay Group, Inc. d/b/a Mr. Shrinkwrap (“Mr. Shrinkwrap”) to the original purchaser (“Customer”) of a ShrinkCover® product. It is part of, and read together with, the ShrinkCover® Terms and Conditions of Sale (the “Terms”). “Standard Product”, “Custom Product”, “Business Purchase” and “Consumer Purchase” have the meanings given in Section 2 of the Terms.

1. Warranty Period

1.1 The warranty period is twelve (12) months from the date of shipment, for every ShrinkCover® product and every purchase.

1.2 The warranty period ends, and this Limited Warranty is void, the moment a cover is heat-shrunk, cut, trimmed, altered or otherwise modified. There are no exceptions. Installing, securing, removing and reinstalling a cover without heat-shrinking, cutting or altering it does not end the warranty period.

This is not a limitation on durability. It reflects the fact that once heat has been applied and the fabric has conformed to the asset, a defect in manufacture can no longer be distinguished from an installation or in-service condition. A cover that is mechanically secured rather than heat-shrunk remains within the warranty period for its full term.

2. What Is Warranted

THIS LIMITED WARRANTY COVERS THE COVER ITSELF — LATENT DEFECTS IN ITS WORKMANSHIP AND ASSEMBLY, AS STATED BELOW. IT IS NOT A WARRANTY OF THE PERFORMANCE OF THE COVER OR OF ANY RESULT, INCLUDING PROTECTION OF THE ASSET OR ITS CONTENTS, AND IT IS SUBJECT TO EVERY EXCLUSION IN SECTION 3.

2.1 Latent defects in workmanship and assembly (all products). Each ShrinkCover® product will be free from latent defects in workmanship and assembly — defects that could not be found on the receiving inspection in Section 7 of the Terms — under normal intended use. Shortage, damage and nonconformities that were apparent on that inspection are governed by Section 7 of the Terms, not by this Limited Warranty.

2.2 Custom Products: the approved drawing defines the cover. A Custom Product is made to the design drawing Customer approved. Its configuration is checked on the receiving inspection under Section 7 of the Terms. Measurements shown on the approved drawing are nominal, and fabrication applies a manufacturing allowance and tolerance determined for each order; dimensional variation within commercially reasonable manufacturing tolerances for sewn covers is not a defect. Fit to the asset is not warranted.

A gross departure from the approved drawing that could not reasonably have been seen on the receiving inspection is treated as a latent defect, and is remedied under Section 7.7 of the Terms.

THE APPROVED DRAWING DEFINES THE COVER. THIS LIMITED WARRANTY DOES NOT WARRANT THAT THE APPROVED DRAWING IS CORRECT FOR CUSTOMER’S UNIT, OR THAT THE COVER WILL FIT IT. THE ACCURACY OF CUSTOMER-SUPPLIED DIMENSIONS AND GEOMETRY REMAINS CUSTOMER’S RESPONSIBILITY UNDER SECTION 27 OF THE TERMS.

2.3 Standard Products: size and specification. The size and specification of a Standard Product are checked on the receiving inspection under Section 7 of the Terms and are not a continuing warranty.

A STANDARD PRODUCT IS MADE TO MR. SHRINKWRAP’S PUBLISHED SIZES. THIS WARRANTY DOES NOT COVER FIT TO ANY PARTICULAR ASSET. CHOOSING THE SIZE AND PRODUCT SUITABLE FOR THE ASSET IS CUSTOMER’S RESPONSIBILITY.

2.4 Storage guidance (not a warranty). Keep unused covers in their original packaging, in climate-controlled storage between 45°F and 85°F, and install them within [six (6)] months of shipment for best results. This is guidance only. Shelf life, storage life and the condition of the material over time are not warranted.

2.5 Substitution is not a defect. Materials, components, colors, hardware, accessories and design details may vary under Section 7.6 of the Terms. That variation is not a defect under this Limited Warranty.

2.6 This Limited Warranty is the sole warranty given on the ShrinkCover® product as supplied, including the ShrinkShield® fabric from which it is made. No separate warranty is given on that fabric.

3. What Is Not Covered

This Limited Warranty does not cover any of the following, or any damage caused by any of them:

  • damage caused by improper installation, handling, lifting, storage or transport;
  • use of a standard boat or hot tub cover for transport;
  • failure to follow the storage, handling, installation, ventilation or removal instructions furnished or otherwise made available by Mr. Shrinkwrap, or failure to install, vent, secure and use the cover in a workmanlike manner consistent with good practice for protective covers;
  • any cover that has been heat-shrunk, cut, trimmed, altered or otherwise modified, whether or not the defect claimed relates to that shrinking, cutting, trimming, alteration or modification;
  • condensation, moisture entrapment, mold, mildew or corrosion beneath or within the cover, including any arising from inadequate ventilation of the covered asset;
  • fit issues resulting from inaccurate, outdated or incomplete drawings, measurements or models supplied by Customer, from changes to the covered unit after design approval, or from Customer’s choice of a Standard Product size;
  • abrasion, tearing, punctures, cuts, or damage from physical impact or contact with the covered asset or its fixtures;
  • UV degradation, environmental exposure, or weather-related damage, including wind, snow or ice loading;
  • damage occurring in transit after risk of loss has passed;
  • modification, alteration or repair of a cover, or use outside the stated purpose; or reuse of a cover that has been heat-shrunk, cut or altered;
  • the performance of the cover or its materials during or after any activity that ends this Limited Warranty — including heat-shrinking, cutting, trimming, altering or modifying the cover — and any result of that activity, including shrink response, appearance, fit and seam integrity;
  • uneven or non-uniform shrinking, in any circumstances;
  • any cover installed or used on an asset it does not fit, or on an asset other than the one shown on the approved drawing or stated in the product listing;
  • variation in fabric, color, hardware, components, accessories or design details resulting from substitution under Section 7.6 of the Terms;
  • normal wear, discoloration or aging, including deterioration of the material in storage;
  • any product that Customer installed or continued to use after a defect was or should have been apparent; and
  • consequential, incidental, indirect, special, exemplary or punitive damages of any kind, subject to Section 9.

4. How to Make a Claim

To make a claim, Customer must, within thirty (30) days after discovering a defect and in all events within the warranty period:

  • submit written notice to Mr. Shrinkwrap describing the defect, with photographs and the order or purchase-order number;
  • stop installing or using the affected product;
  • permit Mr. Shrinkwrap a reasonable opportunity to inspect the product, on site or by return;
  • for any seam claim, return the physical specimen to Mr. Shrinkwrap at Customer’s cost, with at least twelve (12) inches of the seam on each side of the failure intact and visible. A seam claim without the specimen is not considered; and
  • otherwise, return the product only if Mr. Shrinkwrap issues written return authorization.

Claims for shortage, visible damage or apparent nonconformity are governed instead by the ten (10) business day inspection window in Section 7 of the Terms.

5. Sole Remedy

If Mr. Shrinkwrap verifies a defect covered by this Limited Warranty, it will, at its sole election, repair the affected cover, replace it, or refund the price paid for that cover. Mr. Shrinkwrap’s total liability under this Limited Warranty is limited to the price paid for the affected cover.

Each ShrinkCover® cover is a separate commercial unit. Where an order comprises more than one cover, this remedy applies to each affected cover individually: a defect in one cover does not entitle Customer to reject, return or claim in respect of any other cover in the order. Where an order is priced as a lot rather than per unit, the price paid for a cover is the lot price divided by the number of covers in the lot.

REPAIR, REPLACEMENT OR REFUND AT MR. SHRINKWRAP’S ELECTION IS CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR ANY DEFECT IN A SHRINKCOVER® PRODUCT, SUBJECT TO SECTION 9 FOR A CONSUMER PURCHASE.

6. Disclaimer of Other Warranties

TO THE FULLEST EXTENT PERMITTED BY LAW, AND SUBJECT TO SECTION 9 BELOW, EXCEPT FOR THIS EXPRESS LIMITED WARRANTY MR. SHRINKWRAP MAKES NO WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. NO STATEMENT IN ADVERTISING, ON ANY WEBSITE, IN PRODUCT LITERATURE, OR IN ANY SALES DISCUSSION CREATES A WARRANTY.

7. Limitation of Liability; Limitation of Actions

Mr. Shrinkwrap’s liability under this Limited Warranty is subject to the limitation of liability in Section 9 of the Terms. For a Business Purchase it is also subject to the one-year limitation of actions in Section 19 of the Terms.

8. Who and What This Warranty Covers

This Limited Warranty runs to the original purchaser of a ShrinkCover® product and is not transferable. It applies to ShrinkCover® products purchased directly from Mr. Shrinkwrap, including through checkout on mrshrinkwrap.com, and to ShrinkCover® products purchased through an authorized Mr. Shrinkwrap online marketplace listing.

For products purchased through an online marketplace, that marketplace’s return and refund policies apply in addition to this Limited Warranty and are not limited by it. Where a marketplace policy provides a broader or longer remedy, that policy controls for that purchase.

9. Consumer Purchases

For a Consumer Purchase, the following applies and prevails over any conflicting provision of this Limited Warranty:

  • the disclaimer of implied warranties in Section 6 does not apply. Implied warranties, including merchantability and fitness for a particular purpose, are limited in duration to the warranty period in Section 1.1, where such a limitation is permitted;
  • some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the limitations in Sections 3, 5 and 6 and in the Terms may not apply; and
  • this Limited Warranty gives specific legal rights, and the purchaser may also have other rights which vary from state to state.

This is a Limited Warranty and not a full warranty.

10. Pre-Sale Availability

This Limited Warranty is linked from every ShrinkCover® product page on mrshrinkwrap.com, next to the price and add-to-cart button, and is available for review before purchase. It is also furnished with each quote, included with every shipment, and published at mrshrinkwrap.com/shrinkcover-limited-warranty.

Questions about this warranty, or to submit a claim:

Harbor Bay Group, Inc. d/b/a Mr. Shrinkwrap · 660 13th Avenue, Building #4, Prospect Park, PA 19076 · [email protected] · 866-826-1417