Titan Free Standing 3 Post Overhead Semi-Automatic Stretch Wrapping System 4100 by Cousins

Titan Free Standing 3 Post Overhead Semi-Automatic Stretch Wrapping System 4100 by Cousins

Request a quote for accurate shipping costs - fast estimates are likely incorrect.

**Lead Time up to 4-6 Weeks. Lead times can vary, please contact us for more accurate lead times. **Unit manufactured in and shipped from Canada. Units shipping outside of Canada may be subject to additional customs/broker fees. Please contact beforehand for official rate quote.

Note: FS3 refers to the machine support frame style. Includes a free-standing frame making the machine independent and able to be placed almost anywhere. It can be loaded from the front and both sides.

GENERAL SPECIFICATIONS

PRODUCTION SPEED
• 1-30 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

LOAD CAPACITY
• Maximum load weight: Unlimited (floor supported)
• Maximum load size: 50” W x 50” L (71” max. load diagonal) x 86” H (plus up to 4” top overlap)

ROTARY ARM
• Double flange bearing support system
• Twin V-belt drive pulleys with belt tensioner
• 1-12 RPM rotational speed c/w soft start acceleration
• Final revolution deceleration and positive stop alignment
• 1/2 HP DC variable speed motor

FILM CARRIAGE ELEVATOR
• 1/2 HP DC variable speed motor
• Direct flat belt drive system
• Maintenance free 12 point carriage guidance system

FILM DELIVERY SYSTEM
• NEW Super Rapid Thread II ™ 20” capacity pre-stretch film carriage
• Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
• 1/2 HP DC variable speed motor
• Fully electronic dynamic dancer corner compensation
• 33 to 313% fixed stretch capability
• Pre-stretch ratio variable by easy sprocket change
• Rapid Thread ™ Safety Door with auto power cut-off switch
• Superior film-to-roller contact area
• Lifetime warranty on pre-stretch rollers

CONTROL FEATURES
• Simple to operate
• PANASONIC PLC
• Power Off – On – Reset switch & Power On indicator light
• Single button Auto Wrap Cycle Start/Pause
• Cycle Pause for applying top sheets
• Base or Top Wraps First program
• Reinforce Wrap control for mid-wrapping
• Up Only or Up/Down wrap program
• Emergency Stop button
• Rotary Arm Jog switch
• Film Carriage Lower/Raise switch
• Film tension (Force-to-Load) control
• Separate film carriage raise & lower speed controls
• Variable rotary arm speed control
• Rotary arm and carriage elevator dynamic braking system
• Triple beam type auto load height sensing photo-eye, detects dark or shiny loads
• Separate 1 to 9 revolution top & bottom wrap control
• NEMA 12 control panel enclosure
• Dust tight slip ring assembly
• Non-proprietary UL/CSA approved components

STRUCTURAL FEATURES
• All structural steel construction
• Integral structural steel wall/floor mounting stand
• Electro-static powder coated paint finish

SAFETY FEATURES
• Rotary Arm Obstruction Emergency Safety Stop Sensor

ELECTRICAL INPUT REQUIREMENT
• 115 Volts 1 Phase 60 Hz 15 Amps

Mr. Shrinkwrap is a leading distributor of protective products, shrink wrap films and installation supplies with a dedicated team available to take your order at any time of day. We have several experienced shrink wrap installation technicians on staff to help and support you on various aspects of any shrink wrap project. If you would like to place an order over the phone or have questions for us, give Mr. Shrinkwrap a call at 800-847-5290.