800-847-5290

On-Site Service Terms and Conditions

Version 2026-2 · Effective: NOVEMBER 17, 2026

Issued by Harbor Bay Group, Inc. d/b/a Mr. Shrinkwrap (“MSW”), 660 13th Avenue, Building #4, Prospect Park, PA 19076

PART 1. GENERAL TERMS (apply to every on-site service job)

1. What governs the job

1.1 The Job Terms. Every on-site service job is governed by (a) MSW’s written quote or estimate (the “Quote”), (b) any Job Schedule listed on the Quote, (c) these General Terms, and (d) MSW’s Service Rate Card in effect on the Quote date (the “Rate Card”). Together these are the “Job Terms.” The Rate Card is not published on MSW’s website; MSW furnishes it with the Quote and on request.

1.2 Order of precedence. If documents conflict, this order controls: (1) a written agreement for the job signed by the Customer and an officer of MSW; (2) job-specific notes, terms or conditions written on the Quote; (3) the Job Schedule; (4) these General Terms; (5) the Rate Card.

1.3 Customer paperwork does not change the Job Terms. Purchase orders, subcontracts, work orders, vendor-portal terms, invoices-approval forms, and similar documents are accepted for billing and reference only. Any term in them that adds to or conflicts with the Job Terms is rejected and does not apply unless an officer of MSW agrees to it in a signed writing that names the term.

1.4 Acceptance. The Customer accepts the Job Terms by any of: signing the Quote; issuing a purchase order or written authorization that references the Quote; paying a deposit; or allowing MSW to start work. An accepted Quote binds the Customer to the Job Terms; no separate signed acceptance or agreement is required. MSW may also ask the Customer to confirm acceptance by signing through Zoho Sign or another written form. That confirmation does not change the Job Terms.

1.5 Who can bind MSW. Only an officer of MSW can change the Job Terms, and only in a signed writing. MSW crew leaders, technicians, and salespeople may sign site-access, visitor, and safety forms, but those forms do not change the Job Terms or create obligations for MSW beyond site safety rules.

1.6 Quote validity. A Quote is valid for 30 days unless it states otherwise. Material prices are based on resin-based film costs at the Quote date; MSW may re-price a Quote that is accepted after it expires.

2. Scope of work

2.1 What is included. MSW will furnish the labor and materials described in the Quote. Anything not described in the Quote is excluded.

2.2 Standard exclusions. Unless the Quote expressly includes them, the following are excluded: scaffolding, support structures, cable systems and framing; structural engineering and design; permits; traffic and pedestrian control; site security; lifts and access equipment; fire watch; removal and disposal of shrink wrap; repairs to surfaces; protection of finished surfaces beyond the shrink-wrap scope; debris not created by MSW; and work required because of conditions that were not visible or disclosed before the Quote.

2.3 Materials. MSW selects the film type, thickness, and attachment method appropriate to the job. Where the Quote specifies flame-retardant film, MSW will use film certified to NFPA 701. All material is guaranteed to be as specified in the Quote.

2.4 Temporary protection only. Shrink wrap is a temporary protective covering. Unless the Quote expressly states otherwise, MSW’s work does not repair the Customer’s building, vessel, or equipment, and MSW does not diagnose or correct the underlying cause of any leak, damage, or condition. Emergency protection work is performed to limit further exposure until permanent repairs are made by others. Nothing in this Section limits MSW’s lien rights under Section 5.8.

2.5 Changes. Any change in scope, quantities, schedule, access, site conditions, materials, work sequence, or required return trips must be agreed in a written change order before the extra work is performed. A signed MSW Field Extra Work Authorization counts as a written change order. Where written authorization is not practical in an emergency, MSW may proceed to protect people or property and bill the work at Rate Card rates. Changes may result in additional charges.

3. Customer responsibilities

The Customer will, at its own cost and by the scheduled installation time:

3.1 Provide safe, clear, unobstructed access to the work area, including a minimum of 4 feet of cleared work space around the perimeter of each item to be wrapped.

3.2 Clear or cover all combustibles within 10 feet of the work area; obtain any hot-work permit required by the site; and provide fire-watch personnel where site safety procedures require it.

3.3 Have each item prepared as stated in the Quote (for example: clean and dry, ducting or accessories removed, unit lifted or blocked where lifting is required).

3.4 Pad, soften, or protect sharp edges, abrasive points, and fragile components that could puncture the film or be damaged during installation, unless the Quote includes this work.

3.5 Tell MSW before the Quote is issued about any site-specific safety training, badging, drug testing, insurance requirements, or escort rules. Requirements not disclosed before the Quote may result in additional charges.

3.6 Provide a point of contact who is on site, or reachable, at completion to walk the job and sign MSW’s Completion Sign-Off.

4. Schedule, weather, and delays

4.1 Weather. Shrink wrapping depends on suitable weather, including wind, precipitation, and temperature. MSW’s on-site supervisor decides whether conditions are safe and suitable, and MSW may delay or suspend work on that basis. If the Customer requires an installation date against MSW’s advice about the forecast, weather delays and return trips are billable.

4.2 Site readiness. The schedule depends on the site being ready. Delays, standby time, remobilization, and extra trips caused by the Customer, other trades, incomplete scaffolding or support structures, restricted access, unprepared items, or Customer schedule changes are billable at Rate Card rates.

4.3 Rescheduling. Rescheduling with less than 24 hours’ notice may be charged the rescheduling fee on the Rate Card.

4.4 Estimated duration. Durations in the Quote are estimates based on known conditions. Time is not of the essence unless the Quote says so.

4.5 Events outside MSW’s control. MSW is not responsible for delay, loss, or damage caused by circumstances beyond its reasonable control, including severe weather, wind, storms, acts of God, strikes, accidents, acts of other contractors, vandalism, site movement, utility failures, or government action.

5. Price and payment

5.1 Price basis. Prices are as stated in the Quote. Unless the Quote says otherwise, prices are not based on Union or Davis-Bacon prevailing wages. If prevailing-wage, union, or certified-payroll requirements apply, the Customer must tell MSW before the Quote, and pricing will be adjusted to reflect those requirements and their costs.

5.2 Payment terms. Unless the Quote states different terms:

Job type Terms
Boats and residential Paid in full in advance of installation. MSW may agree in writing to accept payment from the Customer on site at completion.
Commercial jobs under $5,000 Paid in full at completion of installation
Commercial jobs $5,000 and over, new customers 50% deposit before mobilization, material procurement, or crew scheduling. Balance due Net 30 from completion with an approved MSW Credit Application; otherwise due at completion
Commercial jobs, established credit customers Net 30 from completion
Long-duration containment billed per square foot or per day Progress invoices every 30 days, first invoice within 30 days of start of installation, each due Net 30

5.2A Credit. Net 30 terms, including progress billing, are available only to Customers with an approved MSW Credit Application. An “established credit customer” is a Customer whose Credit Application MSW has approved and whose account MSW has designated in writing as established and in good standing. The Credit Application may grant MSW a security interest in the Customer’s assets, and MSW may file UCC financing statements to perfect it. MSW may change or withdraw credit terms for future work at any time.

Commercial jobs are payable by ACH, wire transfer, or check only. MSW does not accept credit or debit cards for commercial jobs.

5.3 No retainage. No pay-if-paid. No retention or retainage will be withheld from any payment to MSW. Payment to MSW is not conditioned on the Customer being paid by an owner, general contractor, or anyone else.

5.4 Late payment. Past-due amounts accrue interest at 1.5% per month (18% per year) or the highest rate allowed by law, whichever is lower. The Customer will pay MSW’s reasonable collection costs and attorneys’ fees on past-due amounts.

5.4A Invoice disputes; no set-off. The Customer must dispute an invoice in writing before its due date, stating the reason, and must pay any undisputed portion when due. The Customer may not withhold or set off any amount against an MSW invoice.

5.5 Suspension. If any amount is past due, MSW may suspend work, decline to schedule further work, or require prepayment, and may bill the resulting standby and remobilization.

5.6 Taxes. Prices exclude sales, use, and similar taxes. Applicable taxes will be added unless the Customer provides a valid exemption certificate before invoicing.

5.7 Travel, freight, and pass-through costs. Mobilization, lodging, per diem, freight, equipment rental, and Customer-required permits or insurance are charged as stated in the Quote. Freight shown in a Quote is an estimate; the Customer pays actual freight.

5.8 Lien notices and lien rights. MSW may serve or file any preliminary notice, notice of furnishing, notice of intent, or mechanics’ lien claim available to it by law. Serving or filing a notice is not a claim that the Customer is in default. Before mobilization, the Customer will give MSW the property owner’s name and address, the property address and parcel number, the general contractor and any construction lender, and any project registration or notice-directory number. Any lien waiver MSW signs applies only to amounts MSW has actually received. MSW does not waive lien rights in advance for unpaid work, materials, change orders, or delays.

6. Completion and acceptance

6.1 On completion, MSW will perform a visual inspection and seal any visible holes found at that time.

6.2 The Customer’s point of contact will inspect the work with MSW’s crew leader and sign the Completion Sign-Off before the crew departs. Any item that the Customer believes is not complete must be written on the Sign-Off as a punch-list item.

6.3 The work is accepted when the Sign-Off is signed, or 2 business days after MSW completes the work if no written punch list is given, whichever is earlier. MSW will complete written punch-list items that are within its scope; they do not delay payment of amounts unrelated to them.

7. Limited warranty

7.1 What MSW warrants. MSW warrants that (a) materials will be as specified in the Quote, and (b) its work will be performed in a workmanlike manner in accordance with applicable industry standards at the time of installation.

7.2 What MSW does not warrant. Shrink wrap is temporary protective material. MSW does not warrant that any shrink-wrap system will be 100% watertight, airtight, or free of condensation, or that it will continue to perform for any period after installation. MSW makes no warranty of the outcome of any transport, storage, construction, or abatement activity performed by others.

7.3 Exclusions. The warranty does not cover damage from wind, storms, snow or ice load, severe weather, vandalism, animals, other trades, site or structure movement, sharp or abrasive surfaces, improper substrates, failure of support structures supplied by others, openings or modifications made after installation, lack of maintenance, or use of the shrink wrap other than as intended.

7.4 Workmanship repairs. If a defect in MSW’s workmanship is reported in writing within 30 days of completion, MSW will repair it at no charge for labor and materials; the Customer pays mobilization, travel, lodging, and per diem. All other repairs are billable at Rate Card rates plus materials.

7.5 Exclusive remedy. Repair under 7.4, or at MSW’s option a refund of the price of the defective portion of the work, is the Customer’s only remedy for breach of warranty. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.

8. Liability and indemnity

8.1 Responsibility for loss. MSW is responsible for injury, loss, or damage only to the extent caused by the negligent acts or omissions of MSW or its personnel while performing the work. MSW is not responsible for damage caused by the Customer, other contractors, existing site conditions, weather, or work outside MSW’s written scope.

8.2 No consequential damages. Neither party is liable for lost profits, loss of use, business interruption, delay damages, liquidated damages, penalties, or any indirect, incidental, special, or consequential damages.

8.3 Cap. MSW’s total liability arising from a job, under any theory, is limited to the price paid for that job. This cap does not apply to bodily injury or death, or to damage to third-party property, caused by MSW’s negligence; for those, MSW’s liability is limited to the proceeds of its applicable insurance.

8.4 Customer indemnity. The Customer will defend and indemnify MSW against claims to the extent caused by the negligence or misconduct of the Customer, its contractors, or its invitees, or by site conditions the Customer controls.

8.5 Claims notice. The Customer must give MSW written notice of any claim, with photographs, within 10 days after discovering the damage, and must give MSW a reasonable opportunity to inspect before repairs are made (except emergency repairs to prevent further loss). Any lawsuit must be filed within one year after the claim arises.

8.6 Insurance. MSW maintains commercial insurance and will provide certificates of insurance consistent with its available coverage on request. Additional-insured endorsements, waivers of subrogation, higher limits, or special policies required by the Customer must be disclosed before the Quote and may be charged as a separate line. MSW’s services do not include design, engineering, or other professional services.

9. Site rules and information

9.1 MSW crews will follow reasonable site safety rules disclosed to MSW in advance.

9.2 MSW does not receive, store, or handle Customer controlled technical data, Controlled Unclassified Information, or classified information in performing on-site wrap services. Any request to receive such information, and any related flow-down clause, requires a separate written agreement signed by an MSW officer.

9.3 MSW may photograph its work for quality-control and job records. MSW will not use photographs publicly where the Customer requests in writing that it not do so, or where site rules prohibit photography.

10. Cancellation and termination

10.1 If the Customer cancels after acceptance, the Customer pays for work performed, materials ordered or cut for the job, and mobilization costs incurred, plus the rescheduling fee if cancellation is within 24 hours of the scheduled start. Deposits are applied to these amounts and any balance is refunded.

10.2 Either party may terminate for the other’s material breach that is not cured within 10 days after written notice. Non-payment is a material breach.

11. General

11.1 Governing law and venue. Pennsylvania law governs the Job Terms. Any dispute will be brought in the state or federal courts serving Delaware County, Pennsylvania, and each party consents to that jurisdiction.

11.2 Entire terms. The Job Terms are the entire terms for the job and replace prior discussions. They can be amended only as stated in Section 1.5.

11.3 Independent contractor. MSW performs the work as an independent contractor and controls the means and methods of its work.

11.4 Severability. If any provision is unenforceable, the rest of the Job Terms remains in effect, and the provision is enforced to the maximum extent allowed.

11.5 Assignment and subcontracting. MSW may use qualified subcontractors. The Customer may not assign the Job Terms without MSW’s written consent.

PART 2. JOB SCHEDULES (apply when listed on the Quote)

Schedule A: Scaffold and Containment Systems

A.1 Scaffold structure by others. The scaffold frame structure will be supplied by a contractor other than MSW. The scaffold must be fully planked on each level to provide safe and adequate worker access.

A.2 Scaffold design and stability. The scaffold frame structure must be designed and constructed to remain stable and not move in inclement weather, and to provide appropriate water runoff. All scaffolding must be fully erected, complete, inspected, and accessible before MSW mobilizes.

A.3 Containment material. To provide maximum strength, durability, and safety, the containment system will use heavy-duty, NFPA 701 fire-retardant, 9-mil and/or 12-mil polyethylene shrink wrap, with MSW determining the appropriate material for the project.

A.4 Termination of film. Unless the Quote says otherwise, the shrink wrap terminates at the outermost scaffold or framing member.

A.5 Removal and disposal. Removal and disposal of all containment materials is the responsibility of a contractor other than MSW. If MSW is required to remove or dispose of the containment system, additional charges apply.

A.6 Inspection and watertightness. On completion, MSW will perform a visual inspection and seal any visible holes found at that time. MSW does not guarantee that the containment system will be 100% watertight.

A.7 Unit-rate extras. Where the Quote states a price per square foot, additional area approved by change order is charged at that rate.

Schedule B: Roofs and Building Enclosures

B.1 Inspection and watertightness. On completion, MSW will perform a visual inspection and seal any visible holes found at that time. MSW cannot guarantee that the shrink-wrap system will be 100% watertight and is not responsible for damage caused by moisture penetration, water intrusion, condensation, or other moisture-related conditions.

B.2 Attachment methods. To properly secure the shrink wrap, MSW may need to use furring strips and screws, adhesives, or other appropriate attachment methods. MSW is not responsible for damage resulting from these attachment methods, including screw holes, fastener penetrations, adhesive residue, or other marks or penetrations necessary to secure the system.

B.3 Support structure by others. If a support structure is required, it will be supplied by a contractor other than MSW. It must be designed and constructed to remain stable and secure in inclement weather and to provide appropriate water runoff.

B.4 Support structure responsibility. MSW is not responsible for damage resulting from the failure, movement, collapse, improper design, or improper installation of a support structure supplied by others.

B.5 Roof access. MSW requires complete and unobstructed access to the roof installation area to perform the installation safely and properly.

B.6 Access equipment. If the roof cannot safely support the weight of MSW’s crew and materials, the Customer will provide suitable access equipment, such as boom lifts and/or scissor lifts, as needed for MSW personnel to reach the installation area safely.

B.7 Customer-provided equipment. Customer-provided access equipment must be properly maintained, suitable for the intended use, and compliant with applicable safety requirements. Delays or added costs from unavailable, inadequate, or unsuitable equipment are billable.

B.8 After installation. The Customer is responsible for monitoring the system after installation, including snow and water accumulation, and for notifying MSW promptly of any damage.

Schedule C: Boats and Marine Vessels

C.1 Removal of external equipment. MSW recommends removing all Bimini tops, covers, antennas, radar units, domes, external lights, and other items that could interfere with or be damaged during installation. If these items are not removed before installation, MSW is not responsible for damage to them.

C.2 Painted hulls. MSW recommends that boats with painted hulls be shrink wrapped only down to the rub rail. If the Customer requests full wrapping of a painted hull, the Customer should consult the paint manufacturer before installation to confirm that shrink wrapping is appropriate for that paint system.

C.3 Customer authorization for full wrap. If the Customer chooses full wrapping of a painted hull despite C.2, the Customer assumes responsibility for any damage, discoloration, marking, adhesion, or other effects on the painted surface, and MSW is not responsible for them.

C.4 After completion. Except to the extent caused by MSW’s negligence in performing the installation, the Customer releases MSW from responsibility for damage that occurs after installation is complete, including damage from improper use, misuse, alteration, or use of the shrink wrap for purposes other than intended.

C.5 Limits of protection. Shrink wrap protects against environmental exposure and may help reduce the potential for damage during transport or long-term storage. It cannot eliminate the possibility of damage, and MSW does not guarantee that the vessel or its contents will remain free from damage while covered, transported, stored, or otherwise exposed to the elements.

C.6 Payment. Payment is due in full in advance of installation. MSW may agree in writing to accept payment from the Customer on site at completion.

Schedule D: Equipment, Vehicles, and Transport or Storage Wrap

D.1 Transport is performed by others. MSW wraps items for protection. MSW does not load, secure, transport, or unload the item unless the Quote expressly says so. The carrier, shipper, or Customer is responsible for securement, routing, speed, and handling in transit.

D.2 No transport outcome warranty. Shrink wrap reduces exposure to weather, road debris, and contamination during transport and storage, but it cannot eliminate damage. MSW does not guarantee that any item will arrive or remain free of damage. Claims for transit damage belong against the carrier.

D.3 Lifting and preparation. Where full encapsulation requires lifting, the Customer will provide lifting equipment and qualified personnel. The item must be clean, dry, and prepared as stated in the Quote before the crew arrives.

D.4 Surface protection. Where the Quote includes padding or protection of painted or sensitive surfaces, MSW will provide it as stated. Otherwise the Customer is responsible for identifying and protecting sensitive surfaces before installation.

D.5 Payment terms. Where payment terms are extended on an equipment, vehicle, transport, or storage job, an approved MSW Credit Application is required (Section 5.2A).

D.6 Inspection at destination. The Customer should inspect the wrap and item on arrival and before signing the carrier’s delivery receipt, and note any damage on that receipt.