Shopping Cart

My Cart

items

You have no items in your shopping cart.

Black shown. Photos for White and Clear unavailable.

Click on above image to view full picture

  • Black shown. Photos for White and Clear unavailable.
  • Black shown. Photos for White and Clear unavailable.

Reinforced Shrink Wrap Tape 4" x 50' Single ROLL

Quick Overview

A peel and stick tape with stronger adhesive and reinforcing filaments running bidirectionally through the material, adding increased tear resistance while not negatively affecting ease of installation.

* Required Fields

$51.43 51.43 $

SKU: MSW-RSWT-450

Availability: In stock

Ships From: Houston TX

 

Reinforced Shrink Wrap Tape 4" x 50' One Roll

Typically used alongside our Reinforced Shrink Wrap, this peel and stick Reinforced Shrink Wrap Tape has a very tacky adhesive which sticks even better than standard shrink wrap tape. On top of the stronger adhesive, the material of the tape is reinforced. Reinforcing filaments run bidirectionally through the material, adding increased tear resistance while not negatively affecting ease of installation.


Installation

The surface to be taped should be clean and dry. Dirty or wet surfaces should be completely cleaned with water, paper towels, dry rags or other materials which will prepare the surface for the tape. Accumulations of dust should also be removed to insure a secure seam.  The tape will not adhere as well as it can if the surfaces are not properly prepared.

The tape obtains optimum adhesion when the surface to be taped is warm. The surface should be above 50° - 60°F to insure an acceptable bond. In order to obtain a bond at lower temperatures, external heat may be required. The use of an industrial style hot air blower is one recommended method. Extra care should be taken when attempting to install tape at temperatures below 32°F.

Physical Properties and Typical Values
Property U.S. Value Metric Value
 Standard Weight 4" x 50' Roll  3 lbs  1.4 kg
 Adhesive Thickness  20 Mil  0.51 mm
 Peel Strength *  55 LBF  244.6 N
 Room Temperature ~ 20 Hrs (180° Peel)  10 -14 lbs/in  44.5 - 62.2 N
 Room Temperature ~ Quick Set (180° Peel)   8.5 - 12.5 lbs/in  37.8 - 55.6 N
 Softening Temperature   (Ring and Ball)  245°F - 270°F  -136°C - 150°C
 * Values obtained when using Polyproylene plates.

 

Mr. Shrinkwrap is a leading distributor of protective products, shrink wrap films and installation supplies with a dedicated team available to take your order at any time of day. We have several experienced shrink wrap installation technicians on staff to help and support you on various aspects of any shrink wrap project. If you would like to place an order over the phone or have questions for us, give Mr. Shrinkwrap a call at 800-847-5290.

Free Shipping No

Back to top of page