Moisture & Corrosion Control - Products Below
If you want to let air flow in and moisture out, use vents. If you are enclosing an area and want to absorb any moisture that finds it's way it in, use desiccant bags. If you are concerned about rust, use a corrosion inhibitor (VCI). In any situation, we have a moisture control product that will help with the solution. If you have a question, give us a call at 800-847-5290.
Corrosion Inhibitors - When corrosion control is a must, Vapor Control Inhibiting products are a go to solution with a variety of application methods to solve your most difficult environmental or chemical corrosion situation.
Moisture Control Desiccant Bags - Useful in enclosed spaces to keep condensation from forming, our dessicant bags are rated for three (3) cubic feet and have been tested to absorb moisture for as long as six months. Great for keeping condensation out of shipping containers as well as in a boat where it can lead to mildew and damage to surfaces.
Vents - are useful on nearly anything that is in need of air flow; to help air move both in and out from under your cover at least two openings are reccomended, put a couple of vents up high and a couple down low if there are no air passages at the base of the cover. We recommend at least four vents in any boat over 20'.
| Related Products: |
| Shrink Wrap | All About Shrinkwrap Info page | Starter Kits | Tape |
| Heat Gun Rental | Strapping Systems | End & Bottom Caps | Shrink Wrap Stands |
| Transhield Sewn Covers | Shrink Wrap Stands | Film Knives | Zipper Doors |
Mr. ShrinkWrap is a leading distributor of shrink wrap and installation supplies with a dedicated team available to take your order at any time of day, we also have several experienced shrink wrapping technicians on staff to help and support you on various aspects of any shrink wrap project. If you have a question, give us a call at 800-847-5290.
