Customized in Up to 5 Weeks
SKU
MSW-NCC-FL1150
FL1150 Floor-Level Load Transfer System transfers a square load from one pallet to another by using a clamping mechanism to hold the load above the pallet below.
FL1150 Floor Level Load Transfer System
FL1150 Floor-Level Load Transfer System transfers a square load from one pallet to another. The FL-1150 uses a clamping mechanism to hold the load in place while the pallet below the load can be freely removed and replaced.
Description
The FL-1500 transfers palletized loads from pallet to pallet with use of hand operated pallet jack.
Features
- Transfers palletized loads from pallet to pallet
- Reduces injuries and handling of material
- Small equipment footprint
- User friendly with hand operated pallet jack or forklift
Operation
A pallet jack is utilized to load the system with a palletized load on what we'll call the "Go From" pallet. This is the pallet from which we want to remove a load. The operator moves the "Go From" pallet into the transfer-ready position using a pallet jack. Rubber-faced high-friction clamping pads engage and hold the palletized load securely in place. The "Go From" pallet is lowered to the floor and removed from the system. The operator then moves the "Go To" pallet, (the pallet where the load is intended to be transferred,) under the load using a pallet jack. Clamps are then released which drops the weight of the load onto the "Go To" pallet. The newly transferred load is now on the "Go To" pallet and can be removed from the system.
Performance Conditions and Service Requirements
"Go From" Pallet | 40" x 48" GMA. |
"Go To" Pallet | 40" x 48" CHEP. |
Load Configuration | Palletized Corrugated boxes suitable for clamping. |
Load Weight | 2,000 pounds |
Machine Loading/Unloading | Pallet jack |
Equipment Specifications
Clamp Operation | Hydraulic, adjustable clamp pressure |
Clamp Pads | Rubber faced articulating contact pads with high coefficient of friction. |
Controls | Four (4) button momentary contact with push button pendant. Four functions include Start, Stop, Clamp, and Unclamp. |
Voltage Requirement | 120 VAC. |
Paint | Machinery enamel. |
Description of Options
Guarding | |
Guarding | High-Style guarding package for perimeter of load transfer system. Loading and unloading side of equipment will remain open. |
Magazine Extension | Extend load frame magazine 60 inches. |
Controls | |
PLC Upgrade | Upgrade controls to Allen Bradley MicroLogix PLC |
Push Button Station | Upgrade oendant controls to pedestal push button station. |
Light Curtain Package | Safety light curtain package for loading/unloading side of system. |
Safety Mat | Pressure sensitive safety mats to prevent operation of equipment inside guarded area. |
Mr. Shrinkwrap is a leading distributor of protective products, shrink wrap films and installation supplies with a dedicated team available to take your order at any time of day. We have several experienced shrink wrap installation technicians on staff to help and support you on various aspects of any shrink wrap project. If you would like to place an order over the phone or have questions for us, give Mr. Shrinkwrap a call at 800-847-5290.
SKU | MSW-NCC-FL1150 |
---|---|
Item Returns | This item can be returned |
Customer Questions