DUAL Turntable Heavy Duty Stretch Wrapping System "The Switch" by Cousins

DUAL Turntable Heavy Duty Stretch Wrapping System "The Switch" by Cousins

Request a quote for accurate shipping costs - fast estimates are likely incorrect.

**Lead Time up to 2-4 Weeks. Lead times can vary, please contact us for more accurate lead times. **Unit manufactured in and shipped from Canada. Units shipping outside of Canada may be subject to additional customs/broker fees. Please contact beforehand for official rate quote.

GENERAL SPECIFICATIONS

PRODUCTION SPEED
• 1-35 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

CAPACITY
• Maximum load weight: 4,500lbs dynamic – 10,000lbs static
• Maximum load size to safely clear other turntable: 55” W x 55” L (78” load diagonal)
• Maximum load size to remain inboard of the turntable: 46” W x 46” L (65” load diagonal)
• Maximum load height: 87” H (plus up to 4” top overlap)

TURNTABLES
• 65” diameter laser-cut steel plate with surround deck protection (qty. 2 for dual turntable)
• Maintenance free - 48 roller bearing support system
• Turntable height 2.75” from floor
• ANSI # 50 direct chain drive c/w chain tensioner
• 3-12 RPM rotational speed c/w soft start acceleration
• 1/2 HP AC variable speed motor (qty. 2 for dual turntable)
• Final revolution deceleration and positive stop alignment
• Front and back forklift ports for easy movement
• Accu-Count exact turntable positioning system for additional film savings!
• Optional loading ramps 60” long x 48” wide complete with 10” level porch area available

FILM CARRIAGE ELEVATOR
• 1/2 HP AC variable speed motor
• ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
• Maintenance free carriage guidance system

FILM DELIVERY SYSTEM
• NEW Super Rapid Thread II ™ 20” capacity pre-stretch film carriage
• Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
• 1/2 HP AC variable speed motor
• Fully electronic dynamic dancer corner compensation
• 33% to 313% fixed stretch capability
• Pre-stretch ratio variable using easy sprocket change
• Carriage Descent Obstruction Safety Shut-Off Device
• Rapid Thread ™ Safety Door with auto power cut-off switch
• Side mounted film carriage for operator convenience and safety
• Superior film-to-roller contact area
• Lifetime warranty on pre-stretch rollers

CONTROL FEATURES
• Electronic controls with LCD operator interface
• Power Off – On – Reset switch & Power On indicator light
• Single button Auto Wrap Cycle Start/Pause
• Cycle Pause for applying top sheets
• Reinforce Wrap control for mid-wrapping
• Base or Top Wraps First program
• Up Only or Up/Down wrap program
• Emergency Stop button
• Turntable Jog button
• Turntable Left/Right switch (for dual turntable systems only)
• Film Carriage Lower & Raise buttons
• Film Tension (Force-to-Load) control
• Separate film carriage raise & lower speed controls
• Operator programmable turntable speed control
• Triple beam automatic load height detection sensor for dark or shiny loads (qty. 2 for dual turntable system)
• Separate 1 to 12 revolution top & bottom wrap control
• Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
• A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program

STRUCTURAL FEATURES
• All structural steel construction
• Forklift truck portable base structure design – lifting tubes included for front and rear access
• Structural steel tube machine tower with sheet metal covers
• Electro-static powder coated paint finish

ELECTRICAL INPUT REQUIREMENTS
• 115 Volts 1 Phase 60 Hz 15 Amps

Mr. Shrinkwrap is a leading distributor of protective products, shrink wrap films and installation supplies with a dedicated team available to take your order at any time of day. We have several experienced shrink wrap installation technicians on staff to help and support you on various aspects of any shrink wrap project. If you would like to place an order over the phone or have questions for us, give Mr. Shrinkwrap a call at 800-847-5290.